Brewery Equipment
 
 
   
 
OBSERVATION EQUIPMENT - LIQUID LEVEL GAUGES

- Liquid Level Gauges Stainless & Brass
- Liquid Level Tank Gauges Carbon & Stainless Steel
- Tubular Gauge Valve Model TV55

   
 
 
     
Tubular Gauge valve Model TV55
     
   
ARCHON'S TV55 tubular valves are constructed from cast steel bodies, stainless steel trim, safety ball checks that automatically shut off flow if the glass breaks, and four guard rods providing added safety. Ball checks can be removed upon request for use with steam applications. Various connection types are available that are adaptable to most piping requirements.
The drain and vent connections are in direct line with the TV55 liquid chamber and center line of the vessel connections. The TV55 unit also offers quick cleaning of inside the glass through the vent and drain connections without removing the gauge from service.
More information on our spec sheet
Optional Tubular Armored Level Gauge Model TAG-57
   
The TAG-57 model level gauge along with TV-55 valves is a sturdy alternative to the tubular gauge with guard rods. This gauge has a polycarbonate tube to protect the glass from breakage at the same time providing full view of the process fluid inside the glass tube. It provides more visible length for the same vessel C-C than direct mounting of the glass to the valves
   
     
Stainless Steel & Brass Liquid Level Gauges
     

Our liquid level gauges are designed for use with Corning standard, high pressure, red line or heavy wall brand tubing. Valves are available in bronze or type 316 stainless steel for L (low) and H (high) pressure service. All valves use a stuffing box configuration to seal the glass tube. These units are provided with standard male pipe threaded connections

Liquid Level Gauge 1 Liquid Level Gauge 2 Liquid Level Gauge 3
View our Liquid Level Gauges Full Catalog
 
Liquid Level Tank Gauges - Carbon and Stainless Steel
Archon liquid level gauges provide you with safe viewing of fluid levels in your tank and a wide option of scales from height scales in feet and inches to tank volume. Available with 5/8" O.D. gauge glass and 1/2" MNPT top and bottom connections. The glass tube is totally enclosed by a metal frame with lexan face.
 
ARCHON model BT-LLG Liquid Level Gauge
Liquid Level Gauge BT-LLG

The ARCHON model BT-LLG provides a visual means for checking the contents of a bulk tank and a means for checking the injection rate when pumping directly from the tank.

The injection rate is checked by closing a valve between the gauge and tank and observing the level change in the gauge tube for one minute. If higher pump rate is required, the test period can be shortened. The gauge tube is shrouded by a zinc plated carbon steel frame or 304SS frame. The sight tube is Borosilicate glass and a wide option of elastomers are available.

The gauge is fitted with 1/2 MNPT x 3/8 FNPT top and bottom connections. The standard length for this gauge is 4 ft.; however, special lengths are available in either carbon steel or 304SS.

Request a quotation
ARCHON model ND-LLG Liquid Level Tank Gauges
Liquid Level Gauge ND-LLG

The ARCHON model ND-LLG features 90° connections for ease of installation. The gauge is fitted with inline 1/4" FNPT vent and drain connections. Because the vent and drain connections are inline, glass cleaning is easy.

The sight tube on the model ND-LLG is totally protected. Three sides of the gauge are enclosed with a metal frame, while the face of the gauge is protected with a polycarbonate shield.

For low or medium pressure applications, oil or fuel storage tanks, cooling tanks, cooling tower water tanks and boiler feedwater tanks.

Request a quotation
ARCHON model IV-LLG Liquid Level Tank Gauges

The ARCHON model IV-LLG shielded level gauge is designed with offset intergral ball check valves. The model IV-LLG level gauge has in-line vent and drain connections for easy cleaning without removing the gauge from service. The tubular sight glass is totally enclosed and protected by an armored metal frame and a polycarbonate shield. Misalignment unions for vessel connection are available. This model can replace reflex gauges in low pressure applications.

Request a quotation
 
 
 
View our Full Liquid Level gauge Catalog
 
     
     
     
 
     
  Registration | Login | Check Shipment | Trade Shows | Sitemap | Links   357 Spook Rock Road
Suffern, NY 10901
Tel: (845)368-3600
Fax: (845)368-3040
Contact Us