 |
|
|
|
| Brewery Hoses |
| ARCHON 3/4" WASHDOWN HOSES |
| |
The following 3/4" hoses are used with Archon Steam Mixing Units and Hot & Cold Mixing units.
Our standard lengths are shown below, however if special lengths are required, please contact Archon directly.
Use the descriptions below to choose the hose that is best suited to your working conditions.
|
|
| |
| Washdown Hose Assembly "S" |
 |
| This high pressure ¾" inside diameter hot water hose is appropriate for Archon Industries mixing unit WD2010 series
Steam & Water mixers, and the HCMX series Hot & Cold water mixers. It is suitable for a maximum temperature of
450°F and a maximum pressure of 250 psig. This hose is also suitable for steam
service when fitted with the proper couplings. Steam service use must be specified at
the time of ordering. The hose is constructed of a black EPDM tube with braided, high
tensile steel wire reinforcement. Available in Red (SR), the standard lengths for this
hose are 25ft, 50ft, 75ft and 100ft long. |
| |
| Washdown Hose Assembly "CW" |
 |
| This high pressure ¾" inside diameter hot water hose is appropriate for Archon Industries mixing unit WD2010 series Steam & Water mixers, and the HCMX series Hot & Cold water mixers. It is suitable for a maximum temperature of
212°F and a maximum pressure of 200 psig. This hose is not intended for steam service use. The hose is constructed of a black EPDM tube with synthetic, high-tensile textile cord reinforcement. Available in White EPDM cover, the standard lengths for this hose are 25ft, 50ft, 75ft and 100ft long. |
| |
Model
Number |
Hose I.D. |
Hose
Color |
Temperature
Rating |
Working
Pressure |
Tube
Material |
| SR-45777 |
3/4" |
Red |
-40 °F to + 450 °F |
250 psi |
Black EPDM |
| CW-45779 |
3/4" |
White |
-40 °F to + 212 °F |
200 psi |
Black EPDM |
| YH-45780 |
3/4" |
Yellow |
-20 °F to + 200 °F |
300 psi |
Black Nitrile |
|
| |
|
| |
| |
|
| |
|
|
|
|
|
|
|
